This is the mail archive of the
cygwin@sourceware.cygnus.com
mailing list for the Cygwin project.
Problem Building EGCS Cross-Compiler
- To: crossgcc at cygnus dot com, gnu-win32 at cygnus dot com
- Subject: Problem Building EGCS Cross-Compiler
- From: Dennis Newbold <dnewbold at ivs dot com>
- Date: Fri, 28 Aug 1998 16:52:24 -0700
I downloaded binutils 2.9.1 and egcs1.03a from cygnus. Downloaded and applied
all of Mumit Khan's patches. Host is i386-mingw32. Target is mipsel-gnu-elf.
Am running under cygwin32-b19 with update to cygwinb19.dll. Wanted to run
in a cmd.exe window and use Mumit's native egcs102 compiler, but
C:\MINGW32\bin doesn't have a bash, which I need to run configure.
Binutils built fine w no problem.
After doing configure for egcs, I ran into a problem doing "make cross".
It had a problem doing a make in the texinfo subdirectory. If anyone else has
had
this problem, or can shed some light on it, I'd appreciate it very much.
Attached are:
1. output of running configure
2. Makefile produced by configure
3. output of doing "make cross"
The command line for executing configure was:
../egcs103a/configure --target=mipsel-gnu-elf --with-gnu-as --with-gnu-ld
--with-headers=/xmips/include --with-libs=/xmips/libs i386-mingw32
Thanks a lot, and have a nice weekend.
Dennis
dnewbold@ivs.com
configure.out
# This file was generated automatically by configure. Do not edit.
VPATH = ../egcs103a
links =
host_alias = i386-mingw32
host_cpu = i386
host_vendor = pc
host_os = mingw32
host_canonical = i386-pc-mingw32
target_alias = mipsel-gnu-elf
target_cpu = mipsel
target_vendor = gnu
target_os = elf
target_canonical = mipsel-gnu-elf
build_alias = i386-mingw32
build_cpu = i386
build_vendor = pc
build_os = mingw32
build_canonical = i386-pc-mingw32
gxx_include_dir = ${prefix}/include/g++
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
srcdir = ../egcs103a
prefix = /usr/local
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
tooldir = $(exec_prefix)/mipsel-gnu-elf
program_transform_name = -e s,^,mipsel-gnu-elf-,
datadir = $(prefix)/share
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
GDB_NLM_DEPS =
SHELL = /bin/sh
# INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
# cygwin32 host.
INSTALL_PROGRAM_ARGS =
INSTALL = $(SHELL) $$s/install-sh -c
INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
INSTALL_SCRIPT = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_DOSREL = install-dosrel-fake
AS = as
AR = ar
AR_FLAGS = rc
CC = gcc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
HOST_PREFIX =
HOST_PREFIX_1 = loser-
# These flag values are normally overridden by the configure script.
CFLAGS = -g -O2
CXXFLAGS = -g -O2
LIBCFLAGS = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
PICFLAG =
PICFLAG_FOR_TARGET =
CXX = c++
# Use -O2 to stress test the compiler.
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
DLLTOOL = dlltool
WINDRES = windres
NM = nm
LD = ld
# Not plain GZIP, since gzip looks there for extra command-line options.
GZIPPROG = gzip
# These values are substituted by configure.
DEFAULT_YACC = bison -y
DEFAULT_LEX = flex
BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
else \
echo bison ; \
fi`
YACC = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -y -L $$s/bison/ ; \
elif [ -f $$r/byacc/byacc ] ; then \
echo $$r/byacc/byacc ; \
else \
echo ${DEFAULT_YACC} ; \
fi`
LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo ${DEFAULT_LEX} ; fi`
M4 = `if [ -f $$r/m4/m4 ] ; \
then echo $$r/m4/m4 ; \
else echo m4 ; fi`
MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
MAKEINFOFLAGS =
EXPECT = `if [ -f $$r/expect/expect ] ; \
then echo $$r/expect/expect ; \
else echo expect ; fi`
RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
then echo $$s/dejagnu/runtest ; \
else echo runtest ; fi`
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
CXX_FOR_BUILD = $(CXX)
SUBDIRS = mmalloc libiberty opcodes bfd readline db tcl tk tclX itcl tix texinfo byacc flex bison binutils ld gas gcc sim gdb make patch send-pr gdbtest tgas etc expect dejagnu diff release utils findutils
OTHERS =
# This is set by the configure script to the list of directories which
# should be built using the target tools.
TARGET_CONFIGDIRS = libiberty libgloss libio librx libstdc++ libg++ examples
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
TARGET_SUBDIR = mipsel-gnu-elf
# This is set by the configure script to the arguments passed to configure.
CONFIG_ARGUMENTS = --host=mipsel-gnu-elf --build=i386-mingw32 --enable-multilib --with-cross-host=i386-mingw32 --with-gnu-as --with-gnu-ld --with-headers=/xmips/include --with-libs=/xmips/lib
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
SET_LIB_PATH =
# This is the name of the environment variable used for the path to
# the libraries. This may be changed by configure.in.
RPATH_ENVVAR = LD_LIBRARY_PATH
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
REALLY_SET_LIB_PATH = \
$(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
export $(RPATH_ENVVAR);
ALL = all.normal
INSTALL_TARGET = installdirs \
install-gcc \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
CC_FOR_TARGET = ` \
if [ -f $$r/gcc/xgcc ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/$(TARGET_SUBDIR)/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
fi; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
# If CC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/
CXX_FOR_TARGET = ` \
if [ -f $$r/gcc/xgcc ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
fi; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo c++ | sed -e 's/x/x/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
fi; \
fi`
LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(LD); \
else \
t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
fi; \
fi`
DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(DLLTOOL); \
else \
t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
fi; \
fi`
WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(WINDRES); \
else \
t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
fi; \
fi`
AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
fi; \
fi`
RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
fi; \
fi`
#### host and target specific makefile fragments come in here.
###
# Flags to pass down to all sub-makes.
# Please keep these in alphabetical order.
BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
"LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"M4=$(M4)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
"YACC=$(YACC)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"gxx_include_dir=$(gxx_include_dir)"
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
# If any variables are added here, they must be added to do-*, below.
EXTRA_HOST_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
'RANLIB=$(RANLIB)' \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags that are concerned with the location of the X11 include files
# and library files
#
# NOTE: until the top-level is getting the values via autoconf, it only
# causes problems to have this top-level Makefile overriding the autoconf-set
# values in child directories. Only variables that don't conflict with
# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
#
X11_FLAGS_TO_PASS = \
'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
# If any variables are added here, they must be added to do-*, below.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'LD=$$(LD_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
# ranlib.
# If any variables are added here, they must be added to do-*, below.
# The HOST_* variables are a special case, which are used for the gcc
# cross-building scheme.
EXTRA_GCC_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'HOST_CC=$(CC_FOR_BUILD)' \
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"`if test x'$(LANGUAGES)' != x; then echo 'LANGUAGES=$(LANGUAGES)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(STMP_FIXPROTO)' != x; then echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(LIMITS_H_TEST)' != x; then echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(LIBGCC1_TEST)' != x; then echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(LIBGCC2_CFLAGS)' != x; then echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(LIBGCC2_DEBUG_CFLAGS)' != x; then echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(LIBGCC2_INCLUDES)' != x; then echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(ENQUIRE)' != x; then echo 'ENQUIRE=$(ENQUIRE)'; else echo 'XFOO=bar'; fi`" \
"`if test x'$(BOOT_CFLAGS)' != x; then echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)'; else echo 'XFOO=bar'; fi`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
all-apache \
all-autoconf \
all-automake \
all-bash \
all-bfd \
all-binutils \
all-bison \
all-byacc \
all-cvs \
all-db \
all-dejagnu \
all-diff \
all-dosutils \
all-etc \
all-fileutils \
all-findutils \
all-find \
all-flex \
all-gas \
all-gawk \
all-gnuserv \
all-gprof \
all-grep \
all-grez \
all-gzip \
all-hello \
all-indent \
all-inet \
all-ispell \
all-itcl \
all-ld \
all-libiberty \
all-m4 \
all-make \
all-mmalloc \
all-opcodes \
all-patch \
all-perl \
all-prms \
all-rcs \
all-readline \
all-release \
all-recode \
all-sed \
all-send-pr \
all-shellutils \
all-sim \
all-sn \
all-tar \
all-tcl \
all-texinfo \
all-textutils \
all-tgas \
all-time \
all-uudecode \
all-wdiff
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
#
# The list is in two parts. The first lists those tools which
# are tested as part of the host's native tool-chain, and not
# tested in a cross configuration.
NATIVE_CHECK_MODULES = \
check-bison \
check-byacc \
check-flex
CROSS_CHECK_MODULES = \
check-apache \
check-autoconf \
check-automake \
check-bash \
check-bfd \
check-binutils \
check-cvs \
check-db \
check-dejagnu \
check-diff \
check-etc \
check-fileutils \
check-findutils \
check-find \
check-gas \
check-gawk \
check-gnuserv \
check-gprof \
check-grep \
check-gzip \
check-hello \
check-indent \
check-inet \
check-ispell \
check-itcl \
check-ld \
check-libiberty \
check-m4 \
check-make \
check-mmcheckoc \
check-opcodes \
check-patch \
check-perl \
check-prms \
check-rcs \
check-readline \
check-recode \
check-sed \
check-send-pr \
check-shellutils \
check-sn \
check-sim \
check-tar \
check-tcl \
check-texinfo \
check-textutils \
check-tgas \
check-time \
check-uudecode \
check-wdiff
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
# We put install-opcodes before install-binutils because the installed
# binutils might be on PATH, and they might need the shared opcodes
# library.
INSTALL_MODULES = \
install-apache \
install-autoconf \
install-automake \
install-bash \
install-bfd \
install-opcodes \
install-binutils \
install-bison \
install-byacc \
install-cvs \
install-db \
install-dejagnu \
install-diff \
install-dosutils \
install-etc \
install-fileutils \
install-findutils \
install-find \
install-flex \
install-gas \
install-gawk \
install-gnuserv \
install-gprof \
install-grep \
install-grez \
install-gzip \
install-hello \
install-indent \
install-inet \
install-ispell \
install-itcl \
install-ld \
install-libiberty \
install-m4 \
install-make \
install-mmalloc \
install-patch \
install-perl \
install-prms \
install-rcs \
install-readline \
install-recode \
install-sed \
install-send-pr \
install-shellutils \
install-sim \
install-sn \
install-tar \
install-tcl \
install-texinfo \
install-textutils \
install-tgas \
install-time \
install-uudecode \
install-wdiff
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-emacs \
all-emacs19 \
all-gdb \
all-expect \
all-gash \
all-guile \
all-tclX \
all-tk \
all-tix
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-emacs \
check-gdb \
check-guile \
check-expect \
check-gash \
check-tclX \
check-tk \
check-tix
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-emacs \
install-emacs19 \
install-gdb \
install-guile \
install-expect \
install-gash \
install-tclX \
install-tk \
install-tix
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
all-target-libio \
all-target-libstdc++ \
all-target-librx \
all-target-libg++ \
all-target-newlib \
all-target-winsup \
all-target-libgloss \
all-target-libiberty \
all-target-gperf \
all-target-examples
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
configure-target-libio \
configure-target-libstdc++ \
configure-target-librx \
configure-target-libg++ \
configure-target-newlib \
configure-target-winsup \
configure-target-libgloss \
configure-target-libiberty \
configure-target-gperf \
configure-target-examples
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
check-target-libio \
check-target-libstdc++ \
check-target-libg++ \
check-target-newlib \
check-target-winsup \
check-target-libiberty \
check-target-gperf
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
install-target-libio \
install-target-libstdc++ \
install-target-libg++ \
install-target-newlib \
install-target-winsup \
install-target-libgloss \
install-target-libiberty \
install-target-gperf
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-apache \
clean-autoconf \
clean-automake \
clean-bash \
clean-bfd \
clean-binutils \
clean-bison \
clean-byacc \
clean-cvs \
clean-db \
clean-dejagnu \
clean-diff \
clean-dosutils \
clean-etc \
clean-fileutils \
clean-findutils \
clean-find \
clean-flex \
clean-gas \
clean-gawk \
clean-gnuserv \
clean-gprof \
clean-grep \
clean-grez \
clean-gzip \
clean-hello \
clean-indent \
clean-inet \
clean-ispell \
clean-itcl \
clean-ld \
clean-libiberty \
clean-m4 \
clean-make \
clean-mmalloc \
clean-opcodes \
clean-patch \
clean-perl \
clean-prms \
clean-rcs \
clean-readline \
clean-release \
clean-recode \
clean-sed \
clean-send-pr \
clean-shellutils \
clean-sim \
clean-sn \
clean-tar \
clean-tcl \
clean-texinfo \
clean-textutils \
clean-tgas \
clean-time \
clean-uudecode \
clean-wdiff
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
clean-target-libio \
clean-target-libstdc++ \
clean-target-librx \
clean-target-libg++ \
clean-target-newlib \
clean-target-winsup \
clean-target-libgloss \
clean-target-libiberty \
clean-target-gperf \
clean-target-examples
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
clean-emacs \
clean-emacs19 \
clean-gdb \
clean-expect \
clean-gash \
clean-guile \
clean-tclX \
clean-tk \
clean-tix
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
.PHONY: all
# The target built for a native build.
.PHONY: all.normal
all.normal: \
$(ALL_MODULES) \
$(ALL_X11_MODULES) \
$(ALL_TARGET_MODULES) \
all-gcc
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
# but it may do additional work as well).
# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
# because it is so large that it can easily overflow the command line
# length limit on some systems.
DO_X = \
do-clean \
do-distclean \
do-dvi \
do-info \
do-install-info \
do-installcheck \
do-mostlyclean \
do-maintainer-clean \
do-TAGS
.PHONY: $(DO_X)
$(DO_X):
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
for i in $(SUBDIRS) -dummy-; do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
esac ; \
export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
done
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
for i in $(TARGET_CONFIGDIRS) -dummy-; do \
if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
done
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi install-info
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
# Make sure makeinfo is built before we do a `make info'.
do-info: all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); pwd`; export s; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
else true ; fi
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
maintainer-clean: local-distclean
realclean: maintainer-clean
# This rule is used to clean specific modules.
.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
@dir=`echo $@ | sed -e 's/clean-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
else \
true; \
fi
.PHONY: $(CLEAN_TARGET_MODULES)
$(CLEAN_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/clean-target-//'`; \
rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
else \
true; \
fi
clean-target: $(CLEAN_TARGET_MODULES)
# Check target.
.PHONY: check
check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
# Installation targets.
.PHONY: install uninstall source-vault binary-vault vault-install
install: $(INSTALL_TARGET)
uninstall:
@echo "the uninstall target is not supported in this tree"
source-vault:
$(MAKE) -f ./release/Build-A-Release \
host=$(host_alias) source-vault
binary-vault:
$(MAKE) -f ./release/Build-A-Release \
host=$(host_alias) target=$(target_alias)
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
else \
true ; \
fi
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd` ; export r ; \
$(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
# inet-install is used because the I*Net wants DejaGNU installed but
# not built. Similarly, gzip is built but not installed.
inet-install:
$(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: \
installdirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
gcc-no-fixedincludes
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
#
# all-gui, and all-libproc are handled specially because
# they are still experimental, and if they fail to build, that
# shouldn't stop "make all".
.PHONY: $(ALL_MODULES) all-gui all-libproc
$(ALL_MODULES) all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
else \
true; \
fi
# These rules are used to check the modules which use FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make check. Some
# modules are only tested in a native toolchain.
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
@if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi; \
fi
$(CROSS_CHECK_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_MODULES)
$(INSTALL_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to configure the modules which are built with the
# target tools.
.PHONY: $(CONFIGURE_TARGET_MODULES)
$(CONFIGURE_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
r=`pwd`; export r; \
$(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
else \
echo "Multilibs changed for $${dir}, reconfiguring"; \
rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
else \
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
fi; \
fi; exit 0 # break command into two pieces
@dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
true; \
elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
if [ -d $(srcdir)/$${dir} ]; then \
[ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
cd $(TARGET_SUBDIR)/$${dir}; \
case $(srcdir) in \
/*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
esac ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
srcdiroption="--srcdir=$${topdir}/$${dir}"; \
libsrcdir="$$s/$${dir}"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
$(SHELL) $${libsrcdir}/configure \
$(CONFIG_ARGUMENTS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
else \
$(SHELL) $$s/configure \
$(CONFIG_ARGUMENTS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
fi; \
else \
true; \
fi; \
else \
true; \
fi
# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/all-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/check-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# This rule is used to install the modules which use
# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_X11_MODULES)
$(ALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make all.
.PHONY: $(CHECK_X11_MODULES)
$(CHECK_X11_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_X11_MODULES)
$(INSTALL_X11_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
else \
true; \
fi
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc
all-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
else \
true; \
fi
# Building GCC uses some tools for rebuilding "source" files
# like texinfo, bison/byacc, etc. So we must depend on those.
#
# While building GCC, it may be necessary to run various target
# programs like the assembler, linker, etc. So we depend on
# those too.
#
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap3 bootstrap4
bootstrap bootstrap-lean bootstrap2 bootstrap3 bootstrap4: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
echo "Bootstrapping the compiler"; \
cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
case "$@" in \
*bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3 ;; \
*-lean ) msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare-lean ;; \
* ) msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare ;; \
esac; \
$(SET_LIB_PATH) \
echo "$$msg"; \
cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@echo "Building runtime libraries"; \
$(MAKE) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
@r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
echo "Building the C and C++ compiler"; \
cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@echo "Building runtime libraries"; \
$(MAKE) all LANGUAGES="c c++"
.PHONY: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
fi
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
# EXPERIMENTAL STUFF
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: install-dosrel
install-dosrel: installdirs info
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
install-dosrel-fake:
# This is a list of inter-dependencies among modules.
all-apache:
all-autoconf: all-m4 all-texinfo
all-automake:
all-bash:
all-bfd:
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc
all-bison: all-texinfo
all-byacc:
all-cvs:
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
all-emacs19: all-bison all-byacc
all-etc:
configure-target-examples: $(ALL_GCC)
all-target-examples: configure-target-examples
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-findutils:
all-find:
all-flex: all-libiberty all-bison all-byacc
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
ALL_GCC = all-gcc
all-gcc: all-bison all-byacc all-binutils all-gas all-ld
GDB_TK = all-tcl all-tk all-itcl all-tix
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gnuserv:
configure-target-gperf: $(ALL_GCC)
all-target-gperf: configure-target-gperf all-target-libiberty all-target-libg++
all-gprof: all-libiberty all-bfd all-opcodes
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-gui: all-gdb all-libproc all-target-librx
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-inet: all-tcl all-send-pr all-perl
all-ispell: all-emacs19
all-itcl: all-tcl all-tk
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex
configure-target-libg++: $(ALL_GCC) configure-target-librx
all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
configure-target-libio: $(ALL_GCC)
all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
check-target-libio: all-target-libstdc++
all-libiberty:
configure-target-librx: $(ALL_GCC) configure-target-newlib
all-target-librx: configure-target-librx
configure-target-libstdc++: $(ALL_GCC)
all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
all-opcodes: all-bfd all-libiberty
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
all-rcs:
all-readline:
all-recode: all-libiberty
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd all-opcodes
all-sn: all-tcl all-tk all-itcl all-db all-grep
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-tk: all-tcl
all-texinfo: all-libiberty
all-textutils:
all-tgas: all-libiberty all-bfd all-opcodes
all-time:
all-tix: all-tcl all-tk
all-wdiff:
all-target-winsup: all-target-newlib all-target-libiberty all-target-librx all-target-libio configure-target-winsup
configure-target-winsup: configure-target-newlib
all-uudecode: all-libiberty
configure-target-libiberty: $(ALL_GCC)
all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
### other supporting targets
MAKEDIRS= \
$(prefix) \
$(exec_prefix)
.PHONY: installdirs
installdirs: mkinstalldirs
$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
$(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
mv -f dir.info.new dir.info ; \
else true ; \
fi
dist:
@echo "Building a full distribution of this tree isn't done"
@echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
# Right now this just builds TAGS in each subdirectory. emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does). We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS
# with the gnu make, this is done automatically.
Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
# Support for building net releases
# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
make-stds.texi standards.info*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
# Take out texinfo from a few places; make simple BISON=bison line.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
./configure sun4
[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
|| $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
if [ ! -f $$d/Makefile ] ; then true ; \
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
cd etc ; $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
done)
#
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
if test -r texinfo/util/tex3patch ; then \
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
chmod og=u `find . -print`
if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
else \
ver=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
fi; \
$(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) VER=$$ver
do-tar-gz:
echo "==> Making $(TOOL)-$(VER).tar.gz"
-rm -f $(TOOL)-$(VER)
ln -s proto-toplev $(TOOL)-$(VER)
tar cfh $(TOOL)-$(VER).tar $(TOOL)-$(VER)
$(GZIPPROG) -v -9 $(TOOL)-$(VER).tar
TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.gz
GAS_SUPPORT_DIRS= bfd include libiberty opcodes setup.com makefile.vms
gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof setup.com makefile.vms
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.gz
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in taz TOOL=gdb \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
.PHONY: newlib.tar.gz
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean. For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
$(MAKE) -f Makefile.in taz TOOL=newlib \
SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=
# end of Makefile.in
make.out